🚉

Railway Dispatch Simulator

Gyoen Map Guide

🌐 English

🎯 Map Overview

Gyoen is a stub-end terminal with platforms on two levels, above ground and below. It is the terminus of the Shin-Shonan Railway, so every train that arrives turns back here. A smaller station, Minami-Gyoen, sits just outside; every train in and out of Gyoen passes through it.

  • Gyoen: surface Tracks 2, 4, 5 / underground Tracks 8, 9 (five in total)
  • Minami-Gyoen: Tracks 1 and 2. No departure signal needed — trains pass or call and continue automatically
  • Every train turns back. There are no stub tracks; trains leave from the platform they arrived on
  • The two levels have separate approaches and separate exits. They only merge just before Minami-Gyoen
Some platforms have no track number. Gyoen includes alighting-only platforms drawn to match the real track layout. No train uses them — you only operate Tracks 2, 4, 5, 8 and 9.

🗺 Lever Layout

Lever layout of Gyoen

The upper row is the surface level (Tracks 2, 4, 5); the lower row is underground (Tracks 8, 9). They merge on the right towards Minami-Gyoen.

The "X" and "Y" at the ends of the tracks mark where the track continues. Although they are drawn apart, matching letters are joined — X connects to X, Y to Y. At Gyoen the surface and underground levels are drawn one above the other, so these markers show how they link up. See also "X" and "Y" on the Track Diagram in the How to Play guide.

🏢 Surface and Underground

Gyoen's platforms are split across two levels, and which level you use changes every route involved. Read the track number on the departure board first and decide surface or underground before anything else.

LevelTracksRoutes for arrivalRoutes for departure
Surface 2, 4, 5 11J12A12B12C 1F2F3F6H
Underground 8, 9 11I13D13E 4G5G7H
⚠ Every move needs two routes. Arrivals take "11I or 11J" plus "12x or 13x"; departures take "1F–5G" plus "6H or 7H". Set only the near half and the train will stop partway.

🔧 Route List

Arrivals (Minami-Gyoen → Gyoen)

RouteEntrance → ExitPurpose
11J11 → JFirst home route towards the surface platforms
11I11 → IFirst home route towards the underground platforms
12A12 → ASecond home route into Track 2
12B12 → BSecond home route into Track 4
12C12 → CSecond home route into Track 5
13D13 → DSecond home route into Track 8
13E13 → ESecond home route into Track 9

Departures (Gyoen → Minami-Gyoen)

RouteEntrance → ExitPurpose
1F1 → FDeparture from Track 2
2F2 → FDeparture from Track 4
3F3 → FDeparture from Track 5
4G4 → GDeparture from Track 8
5G5 → GDeparture from Track 9
6H6 → HTakes surface departures on towards Minami-Gyoen
7H7 → HTakes underground departures on towards Minami-Gyoen
6H and 7H merge onto the same track. When a surface and an underground service leave back to back, whichever you send first holds the other up. Check the times on the departure board and decide the order.

🔄 Turning Trains Back

Every train at Gyoen turns back. Because no stub track is involved, the procedure is short.

  1. Check the arrival track on the board

    Surface (2, 4, 5) or underground (8, 9) determines every route that follows.

  2. Set the first home route

    11J for the surface, 11I for underground.

  3. Set the second home route into the platform

    12A / 12B / 12C for the surface, 13D / 13E for underground.

  4. Set both departure routes and press the button

    The platform route (1F5G) plus 6H (surface) or 7H (underground).

🔔 Departure Buttons

There are five buttons, all at Gyoen. Minami-Gyoen has none.

TrackLevelSound
Track 2SurfaceBell
Track 4SurfaceBell
Track 5SurfaceBell
Track 8UndergroundLow bell
Track 9UndergroundLow bell

⚠ Common Mistakes

1. Forgetting the second route

Both arrivals and departures here come in pairs. Set 11I or 11J and forget the second home route, and the train stops short of Gyoen. The same applies on the way out: forget 6H or 7H and it stops just past the platform.

2. Confusing the two levels

Setting the surface route 11J for a Track 8 or 9 service is a common slip. Remember that the single-digit low numbers (2, 4, 5) are on the surface and 8 and 9 are underground.

3. Turnbacks jamming at peak

In the morning and evening peaks all five platforms fill up. Hold a departure and there is nowhere to put the next arrival. Before setting an arrival route, check that the train already on that platform has left.